Contacts
  1. 0120 6909582
  2. Office No TS 1503-1505, 14th Floor, Galaxy Blue Sapphire, Plot No C-03, Sector -4, Greater Noida (West), Uttar Pradesh - 201309
  3. info@mobatime.in
Quick query

MOBATIME develops and produces all the components and interfaces for the clockwork internally to work with all the standard time signals. Tailored compatibility is a feature of every component – even in projects with special requirements or expansions of existing systems.

SEM 100

The SAM/SEM 100 is a modern high-quality movement for precise time display (SAM 100(t): h/min; SEM 100(t): h/min/s). Two powerful motors move hands for clocks up to Ø 100 cm. The SAM/SEM 100 movements can be controlled using MOBALine or DCF active time code. More signals are possible with a clock controller set.

know more
190 Series

Modular movement of the latest technology for the display of hours and minutes or hours, minutes, and seconds. For illuminated and non-illuminated clocks up to Ø 80 cm with transparent and non-transparent dials. All types with central nut fixing.

know more
NBU 190

Self-setting movement for indoor and outdoor slave clocks used in LAN-based time systems. This high-technology LAN device can be synchronized from a time server or a Net Master Clock via NTP Multicast or Unicast (IP based). The NBU 190 can be powered via PoE (Power over Ethernet) and/or 24 VDC.

know more
GU 192

Robust, self-setting, modular movement for outdoor clocks. Model 192 used for non-translucent dials, 192t for translucent dials. An autonomous operation for more than 6 years with an exchangeable lithium battery. Worldwide use and time display accurate to the second due to the synchronization to the time reference of GPS (Global Positioning System).

know more
FU 192

FU 192 is a modular, state-of-the-art movement for indoor and outdoor clocks (with or without illumination) up to Ø 80 cm, for an hour and minute display. Execution 192 for non-transparent dials, 192t for transparent dials

know more
QU 192

Modular, state-of-the-art movement for indoor and outdoor clocks (with or without illumination) up to Ø 80 cm, for an hour and minute display. Execution 192 for non-transparent dials, 192t for transparent dials.

know more
NU 90

Minute impulse movement for indoor and outdoor clocks up to Ø 80 cm. Impulse voltage adjustable by DIP switch.

know more
NU 91

Minute impulse movement for indoor and outdoor clocks up to Ø 80 cm. Impulse voltage 24 VDC.

know more
NU 90 SYN

Minute impulse movement with a synchronous second for indoor and outdoor clocks up to Ø 80 cm. Impulse voltage adjustable by DIP switch.

know more
SEI 40

Second impulse movement for indoor and outdoor clocks with a dial diameter up to 40 cm. Available with hour, minute, and second hands. Simple configuration of movement by means of DIP switches.

know more
SEM 40

Multifunctional and maintenance-free MOBALine movements for indoor and outdoor clocks up to Ø 40 cm. The SAM 40 movement is available with an hour and minute hands whereas the SEM 40 has an additional second hand. Both movements are self-setting and powered via MOBALine.

know more
SEN 40

Multifunctional and maintenance-free NTP movements for indoor and outdoor clocks up to Ø 40 cm. The SAN 40 movement is available with an hour and minute hands whereas the SEN 40 has an additional second hand. Both movements are self-setting and powered via PoE.

know more
DMU 140

Engine-driven movement for big indoor or outdoor clocks from 80 cm to 140 cm diameter. The movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more
DMU 160

Engine-driven movement for facade clocks of up to 160 cm diameter. The movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more
DMU 350

Engine-driven movement for facade clocks of up to 350 cm diameter. The movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more
MWS10

Engine-driven movement for large facade clocks. The MW10 / MWS 10 movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more
MW 20

Engine-driven movement for large facade clocks. The movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more
MW 24

Engine-driven movement for large facade clocks. The movement can be operated as a stand-alone clock, synchronized from a time code receiver, or controlled from a master clock.

know more